9 errors and messages, Errors and messages – Siemens TC63 User Manual
Page 29
TC63 AT Command Set
1.9 Errors and Messages
s
TC63_ATC_V00.490
Page 29 of 501
5/24/05
Confidential / Draft - Do not copy
1.9
Errors and Messages
The command result codes "+CME ERROR:
" and "+CMS ERROR:
" indicate errors related to mobile
equipment or network functionality.
can be either numeric or verbose and is selectable via
A result error code terminates the execution of the command and prevents the execution of all remaining com-
mands that may follow on the same command line. If so, neither "ERROR" nor "OK" result codes are returned
for these commands. A 30 seconds timeout will deliver "ERROR" when the input of a command is not complete.
Using the wrong command syntax may result in errors: For example, using the execute command syntax
although the command has no execute format, causes "ERROR" to be returned. Likewise, using the write com-
mand syntax although the command has no write format causes "+CME ERROR:
" to be returned.