Siemens TC63 - Manual (Page 325)

TC63 AT Command Set
13.3 AT+CMGD
s
TC63_ATC_V00.490 Page 325 of 501 5/24/05
Confidential / Draft - Do not copy
13.3 AT+CMGD Delete SMS message
Syntax
Command Description
Write command deletes message from preferred message storage location .
Notes
• If there is no SMS stored at the selected index, the response is OK too.
• This command should be used only after the SMS data from the SIM have been read successfully for the first
time. This may take up to 30 seconds after ^SYSSTART depending on the SIM used. A SMS delete attempt
before the SIM is ready will result in ''+CME Error: 14'' (SIM busy).
• We recommend to take advantage of the "^SSIM READY" URC. If enabled with
AT^SSET
, this URC acknowl-
edges to the user that SIM data is accessible after SIM PIN authentication. It will be delivered once the ME
has completed reading data from the SIM card.
Test Command
AT+CMGD=?
Response(s)
OK
Write Command
AT+CMGD=
Response(s)
OK
ERROR
+CMS ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.05 % % % % % % % ! % !