4 at^sset indicate sim data ready, Ssim ready, At^sset – Siemens TC63 User Manual
Page 370: Tc63 at command set
TC63 AT Command Set
14.4 AT^SSET
s
TC63_ATC_V00.490
Page 370 of 501
5/24/05
Confidential / Draft - Do not copy
14.4
AT^SSET Indicate SIM data ready
After power-up and personalization (PIN entry if required) the ME starts reading data from SIM. The
command controls the presentation of the "
" URC which indicates, on the corresponding serial
channel, when the ME has finished reading SIM data. Afterwards all commands that depend on SIM data fields
can be used, e.g. SMS and phonebook commands.
Syntax
Unsolicited Result Code
^SSIM READY
The URC acknowledges to the user that SIM data is accessible.
Parameter Description
URC presentation mode
0
(&F)
Disable URC "
" indication.
1
Enable URC "
" indication.
Test Command
AT^SSET=?
Response(s)
^SSET:
(list of supported
s)
OK
Read Command
AT^SSET?
Response(s)
OK
ERROR
+CME ERROR:
Write Command
AT^SSET=
]
Response(s)
OK
ERROR
+CME ERROR:
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS
!
%
%
%
%
%
%
!
%
!
(num)(&W)(&V)