Siemens TC63 - Manual (Page 183)

TC63 AT Command Set
8.3 AT^SOPS
s
TC63_ATC_V00.490 Page 183 of 501 5/24/05
Confidential / Draft - Do not copy
Operator name; format depends on the source of the operator name, specified by .
Service Provider Name according to setting of Service No. 17 in the SIM Service Table (EF
SST
).
Operator
Operator name in numerical presentation contains the GSM Location Area Identification (LAI) number, which
consists of the 3-digit Mobile Country Code (MCC) plus the 2- or 3-digit Mobile Network Code (MNC).
Parameter is stored non-volatile to the SIM.
Parameter is not applicable.
Parameter is not applicable.
Note
• The
AT^SOPS
Test command is only accepted by the module after a valid pin has been entered.
(str)
(num)
(num)