beautypg.com

Ciev, Inddescr, List o – Siemens TC63 User Manual

Page 72: Sind, Nitz" an, Tc63 at command set

background image

TC63 AT Command Set

3.3 AT^SIND

s

TC63_ATC_V00.490

Page 72 of 501

5/24/05

Confidential / Draft - Do not copy

Unsolicited Result Codes

URC 1

Format of the standard indicator:

+CIEV:

,

Value related to an indicator has changed.

URC 2

Format of the "adnread" indicator issued when accessing the ADN phonebook records stored on the SIM:

+CIEV:

,

,

,

,

+CIEV:

, "READY"

One URC is issued for every used Abbreviated Dialing Number (ADN) phonebook record. After the last record

of the ADN phonebook was read, a URC with "READY" tag signals end of processing.

URC 3

Format of the Voice Message indicator, if the number of waiting messages is delivered by the network:

+CIEV:

,

,

If the number of waiting messages is not delivered the standard indicator applies.

URC 4

Format of the "eons" indicator:

+CIEV:

,

,

,

One URC is issued for each new LAI (Location Area Information) broadcast by the network.

URC 5

Format of the "nitz" indicator:

+CIEV:

,

,

,

Parameter Description

String values and their

ranges.

All indicators supported by

AT+CIND

are accessible with this command, too. A detailed description of these indi-

cators can be found there.

The following indicators are accessible via

AT^SIND

only:

“audio“

Activity of the built-in audio unit.

“vmwait1“

Voice Message Waiting Indication for line 1

"vmwait1" and "vmwait2" indicate the receipt of a special short message with

a Voice Message Waiting Indicator. The service must be provisioned by the

operator.

The numbers 1 or 2 in "vmwait1" and "vmwait2" are related to the two lines of

the Alternate Line Service (ALS), also defined in CPHS Phase 2 standard. For

further details refer to the

AT^SALS

command.

The presentation mode of the indicator varies with the operator: If more than

one message are waiting, some operators only indicate the first one, others

deliver the indicator each time a new voice message is put into the mailbox.

(str)

0

Audio unit not active.

1

Value 1 means for example:

Outgoing voice call: Indicator appears when dialing starts.

Incoming voice call: Indicator appears prior to the RING result code.

0

The value 0 notifies that no new voice message is available, and is pro-

vided by the service center to clear the voice message indication after

the subscriber has retrieved all voice messages.

1

The value 1 notifies the subscriber that the mailbox contains one or

several messages.