1 at^moni responses, At^moni responses – Siemens TC63 User Manual
Page 194
TC63 AT Command Set
8.8 AT^MONI
s
TC63_ATC_V00.490
Page 194 of 501
5/24/05
Confidential / Draft - Do not copy
• To some extent, the cell monitoring command
covers the same parameters. The receiving level,
for example, can be queried with both commands. Yet the resulting values may be slightly different, even
though obtained over a time period of a few seconds. This is quite normal and nothing to worry about, as the
cell information is permanently updated.
• For compatibility with earlier products and to support legacy applications, any input character may be used to
stop the output in certain cases (depending on the settings of
and
).
8.8.1
AT^MONI responses
ME is not connected:
a) ME is camping on a cell and registered to the network:
b) ME is camping on a cell but not registered to the network (only emergency call allowed):
c) ME camping on a cell, but searching for a better cell (cell reselection):
d) ME is searching and could not (yet) find a suitable cell:
ME is connected (Call in progress):
Columns for Serving Cell:
Serving Cell I Dedicated channel
chann rs dBm MCC MNC LAC cell NCC BCC PWR RXLev C1 I chann TS timAdv PWR dBm Q ChMod
1013 21 -71 001 01 1001 0103 7 7 33 -105 33 I No connection
Serving Cell I Dedicated channel
chann rs dBm MCC MNC LAC cell NCC BCC PWR RXLev C1 I chann TS timAdv PWR dBm Q ChMod
1013 21 -71 001 01 1001 0103 7 7 33 -105 33 I Limited Service
Serving Cell I Dedicated channel
chann rs dBm MCC MNC LAC cell NCC BCC PWR RXLev C1 I chann TS timAdv PWR dBm Q ChMod
1013 21 -71 001 01 1001 0103 7 7 33 -105 33 I Cell Reselection
Serving Cell I Dedicated channel
chann rs dBm MCC MNC LAC cell NCC BCC PWR RXLev C1 I chann TS timAdv PWR dBm Q ChMod
Searching
Serving Cell I Dedicated channel
chann rs dBm MCC MNC LAC cell NCC BCC PWR RXLev C1 I chann TS timAdv PWR dBm Q ChMod
1013 19 -76 001 01 1001 0103 7 7 33 -105 33 I 1015 1 0 5 -76 0 S_HR
Column
Description
chann
ARFCN (Absolute Frequency Channel Number) of the BCCH carrier
rs
RSSI value 0 - 63 (RSSI = Received signal strength indication)
dBm
Receiving level of the BCCH carrier in dBm
MCC
Mobile Country Code (first part of the PLMN code)
MNC
Mobile Network Code (second part of the PLMN code)
LAC
Location area code, see note below
cell
Cell ID
NCC
PLMN colour code
BCC
Base station colour code
PWR
Maximal power level used on RACH channelin dBm