beautypg.com

Siemens TC63 User Manual

Page 330

background image

TC63 AT Command Set

13.6 AT+CMGR

s

TC63_ATC_V00.490

Page 330 of 501

5/24/05

Confidential / Draft - Do not copy

Notes

• Response if

AT+CMGR

is used to read an empty record index: +CMGR: 0,,0

• Response if

AT+CMGR

is used to read a non-existent record index: +CMS ERROR: invalid memory index

• The parameters

and

will only be displayed if parameter

of the

AT^SSCONF

command is

set to 1.

• This command can be used only after the SMS data from the SIM have been read successfully for the first

time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds

depending on the SIM used. While the read process is in progress, an attempt to use any of the SMS read

commands will result in ''+CME Error: 14'' (SIM busy)

• We recommend to take advantage of the "^SSIM READY" URC. If enabled with

AT^SSET

, this URC acknowl-

edges to the user that SIM data is accessible after SIM PIN authentication. It will be delivered once the ME

has completed reading data from the SIM card.