Siemens TC63 - Manual (Page 345)

TC63 AT Command Set
13.16 AT+CSMP
s
TC63_ATC_V00.490 Page 345 of 501 5/24/05
Confidential / Draft - Do not copy
13.16 AT+CSMP Set SMS text mode parameters
Syntax
Command Description
The write command selects values for additional parameters needed when SM is sent to the network or placed
in a storage when text format message mode is selected.
It is possible to set the validity period starting from when the SM is received by the SMSC ( is in range 0...
255) or define the absolute time of the validity period termination ( is a string). The format of is given
by . If TA supports the enhanced validity period format, see GSM 03.40), it shall be given as a hexadecimal
coded string (e.g. ) with quotes.
Parameter Description
First Octet
depending on the command or result code: first octet of GSM 03.40 SMS-DELIVER, SMS-SUBMIT (default 17),
SMS-STATUS-REPORT, or SMS-COMMAND (default 2) in integer format
0...17
(&F) ...255
Depending on SMS-SUBMIT setting: GSM 03.40 TP-Validity-Period either in integer format or in time-
string format (refer )
0...167 (&F) ...255
Data Coding Scheme
GSM 03.38 SMS Data Coding Scheme, or Cell Broadcast Data Coding Scheme in integer format
0
(&F) ...247
Test Command
AT+CSMP=?
Response(s)
OK
Read Command
AT+CSMP?
Response(s)
+CSMP:
, / , ,
OK
Write Command
AT+CSMP=
[, / [, [, ]]]
Response(s)
+CSMP:
OK
If sending fails
ERROR
+CMS ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.05 % % % % % % % ! % !
(num)
(num)
(num)