Siemens TC63 - Manual (Page 418)

TC63 AT Command Set
18.8 AT^SAIC
s
TC63_ATC_V00.490 Page 418 of 501 5/24/05
Confidential / Draft - Do not copy
Notes
• The factory defaults of
AT^SAIC
vary with the selected audio mode.
If
AT^SNFS
=1 or 4 or 5, then
AT^SAIC
=2,1,1.
If
AT^SNFS
=2 or 3 or 6, then
AT^SAIC
=2,2,2.
AT^SNFD
can be used to reset the factory defaults.
• For use after restart of the ME, you are advised to store the settings of
AT^SAIC
and
AT^SNFS
to the audio
profile saved with
AT^SNFW
. Otherwise, audio mode 1 (
AT^SNFS
=1) and audio interface 2 (
AT^SAIC
=2,1,1)
will be active each time the ME is powered up.