Tc63 at command set – Siemens TC63 User Manual

Page 359

TC63 AT Command Set

13.25 AT^SMGR

TC63_ATC_V00.490

Page 359 of 501

5/24/05

Confidential / Draft - Do not copy

13.25

AT^SMGR Read SMS message without setting status to REC
READ

Syntax

Notes

• The

command is a specific Siemens command with the same syntax as

Read SMS mes-

sage. The only difference is that the status ''REC UNREAD'' of a short message is not overwritten to ''REC

READ''.

• This command can be used only after the sms data from the SIM have been read successfully for the first

time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds

depending on the SIM used. While the read process is in progress, an attempt to use any of the sms read

commands will result in ''+CME Error: 14'' (SIM busy)

• We recommend to take advantage of the "^SSIM READY" URC. If enabled with

, this URC acknowl-

edges to the user that SIM data is accessible after SIM PIN authentication. It will be delivered once the ME

has completed reading data from the SIM card.

Test Command

AT^SMGR=?

Response(s)

^SMGR:

Write Command

AT^SMGR=

Response(s)

see

Reference(s)

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

Last

SIEMENS