10 at^smong gprs monitor, Tc63 at command set – Siemens TC63 User Manual
Page 198
TC63 AT Command Set
8.10 AT^SMONG
s
TC63_ATC_V00.490
Page 198 of 501
5/24/05
Confidential / Draft - Do not copy
8.10
AT^SMONG GPRS Monitor
The
command supplies GPRS specific cell information. There are two ways to retrieve the informa-
tion: once on request by using the execute command or automatically every
seconds by using the
write command. To stop the periodic presentation type "AT" or "at".
Syntax
Parameter Description
1
Cell Info Table
Display period in seconds
If
is omitted the cell data will be presented only once on a single line (as if Execute command was
issued).
is given, the cell data will be listed repeatedly on 10 data lines. Every 10
th
data line is followed by
the header, simply to repeat the column titles.
1...100
Test Command
AT^SMONG=?
Response(s)
^SMONG:
(list of supported