Siemens TC63 - Manual (Page 204)

TC63 AT Command Set
8.14 AT+CPOL
s
TC63_ATC_V00.490 Page 204 of 501 5/24/05
Confidential / Draft - Do not copy
8.14 AT+CPOL Preferred Operator List
The
AT+CPOL
read command returns the list of the preferred operators. The
AT+CPOL
write command allows to
edit the list of the preferred operators. If is given but is left out, the entry is deleted. An
operator can be only once in the list.
Syntax
Parameter Description
The order number of the operator in the SIM preferred operator list.
2 Numeric format
Operator in numeric format (GSM Location Area Identification number which consists of a 3-digit country code
plus a 2- or 3-digit network code).
Test Command
AT+CPOL=?
Response(s)
+CPOL:
(list of supported s), (list of supported s)
OK
ERROR
+CME ERROR
Read Command
AT+CPOL?
Response(s)
+CPOL:
, ,
+CPOL:
...
OK
ERROR
+CME ERROR
Write Command
AT+CPOL=
[, , ]
Response(s)
OK
ERROR
+CME ERROR:
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07 % % % % % % % ! % !
(num)
(num)
(str)