Siemens TC63 - Manual (Page 501)

TC63 AT Command Set
21.9 Alphabetical List of AT Commands
s
TC63_ATC_V00.490 Page 501 of 501 5/24/05
Confidential / Draft - Do not copy
ATD>
Mobile originated call from active memory using corre-
sponding field
Section 7.6 , page 147
ATDI
Mobile originated call to ISDN number Section 7.7 , page 148
ATDL
Redial last number used Section 7.8 , page 149
ATE
Enable command echo Section 4.5 , page 93
ATH
Disconnect existing connection Section 7.9 , page 150
ATH
Manual rejection of a network request for PDP context
activation
Section 11.20 , page 306
ATI
Display product identification information Section 6.1 , page 134
ATL
Set monitor speaker loudness Section 18.2 , page 412
ATM
Set monitor speaker mode Section 18.3 , page 412
ATO
Switch from command mode to data mode / PPP online
mode
Section 7.17 , page 159
ATP
Select pulse dialing Section 7.29 , page 178
ATQ
Set result code presentation mode Section 2.4 , page 35
ATS0
Set number of rings before automatically answering a call Section 7.12 , page 154
ATS0
Automatic response to a network request for PDP context
activation
Section 11.21 , page 307
ATS10
Set disconnect delay after indicating the absence of data
carrier
Section 7.16 , page 158
ATS18
Extended call release report Section 3.5 , page 85
ATS3
Set command line termination character Section 20.2 , page 458
ATS4
Set response formatting character Section 20.3 , page 459
ATS5
Write command line editing character Section 20.4 , page 460
ATS6
Set pause before blind dialing Section 7.13 , page 155
ATS7
Set number of seconds to wait for connection completion Section 7.14 , page 156
ATS8
Set number of seconds to wait for comma dialing modifier Section 7.15 , page 157
ATT
Select tone dialing Section 7.30 , page 178
ATV
Set result code format mode Section 2.5 , page 36
ATX
Set CONNECT result code format and call monitoring Section 2.6 , page 37
ATZ
Set all current parameters to user defined profile Section 2.8 , page 39
AT Command Description Section and Page