Siemens TC63 - Manual (Page 113)

TC63 AT Command Set
5.2 AT+CPIN2
s
TC63_ATC_V00.490 Page 113 of 501 5/24/05
Confidential / Draft - Do not copy
Note
• Functions accessible only after PIN2 authentication:
AT+CACM
: Accumulated call meter (ACM) reset or query
AT+CAMM
: Accumulated call meter maximum (ACMmax) set or query
AT+CLCK
: Facility lock to "FD" (Fixed dialing phonebook)
AT^SLCK
: Facility lock to "FD" (Fixed dialing phonebook)
AT+CPWD
: Change "P2"password
AT^SPWD
: Change "P2"password
AT+CPUC
: Price per unit and currency table
AT+CPIN2
: Enter SIM PIN2 or SIM PUK2 if requested.
For example, SIM PIN2 will be needed when you attempt to edit the "FD" phonebook and ME returns "+CME
Error 17" or "+CPIN: SIM PIN2".
Once the required has been entered correctly, PIN2 authentication code changes to READY. After
300s, a repetition of the authentication process is required (PIN2 authentication code changes from READY
to SIM PIN2).
Examples
EXAMPLE 1
Change PIN2
EXAMPLE 2
Unblock a disabled PIN2
EXAMPLE 3
Write into "FD" phonebook
AT+CPWD="P2","0000","8888"
(where "0000" = old PIN2 and "8888" = new PIN2)
OK
AT+CPIN2?
+CPIN2: SIM PUK2
PIN2 has been disabled, PUK2 must be entered
OK
to define a new PIN2
AT+CPIN2=12345678,8888
where "12345678" is the PUK2, and "8888" the new
PIN2.
AT+CPBS="FD"
OK
AT+CPBW=2,"+493012345678",145,"Charly"
+CME ERROR 17
access denied due to missing PIN2 authentication
AT+CPIN2=8888
OK
AT+CPBW=2,"+493012345678",145,"Charly"
OK