Tc63 at command set – Siemens TC63 User Manual
Page 322
TC63 AT Command Set
13.1 SMS parameters
s
TC63_ATC_V00.490
Page 322 of 501
5/24/05
Confidential / Draft - Do not copy
Reference number to identify all segments of the concatenated SMS (i.e. the number needs to be the same for
=8 then max=255, otherwise 65535.
0...255
0...65535
Service Center Address
GSM 04.11 RP SC address Address-Value field in string format; BCD numbers (or GSM default alphabet char-
acters) are converted to characters of the currently selected TE character set (refer to command
); type
of address given by
Service Centre Time Stamp
GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format (refer
Sequence number of the concatenated SMS beginning with 1. The number must be incremented by one for
each segment of the concatenated short message.
=0 means: ignore the value. This will result in a non-concatenated SMS.
0...255
Serial Number
GSM 03.41 CBM Serial Number in integer format
Status
GSM 03.40 TP-Status in integer format
0...255
Message status
3GPP 27.005 Interface of SMS and CB. Indicates the status of message in memory.
(num)
(num)(+CSCS)
(num)
(num)
(num)
(num)
(str)
Description
text mode (
PDU mode (
=0)
Default
Received unread mes-
sages
"REC UNREAD"
0
for SMS reading com-
mands
Received read messages "REC READ"
1
Stored unsent messages "STO UNSENT"
2
for SMS writing com-
mands
Stored sent messages
"STO SENT"
3
All messages
"ALL"
4