1 gsm alphabet tables and ucs2 character values, Gsm alphabet tables and ucs2 character values, Figure 1.1 – Siemens TC63 User Manual

Page 22: Main character table of gsm 03.38 alphabet

Text mode
Original mode

TC63 AT Command Set

1.5 Supported character sets

TC63_ATC_V00.490

Page 22 of 501

5/24/05

Confidential / Draft - Do not copy

1.5.1

GSM alphabet tables and UCS2 character values

This section provides tables for the GSM 03.38 alphabet supported by the ME. Below any GSM character find

the corresponding two byte character value of the UCS2 alphabet.

1) This code is an escape to the following extension of the 7 bit default alphabet table.
2) This code is not a printable character and therefore not defined for the UCS2 alphabet. It shall be treated as the accom-

panying control character.

Figure 1.1: Main character table of GSM 03.38 alphabet