Tc63 at command set – Siemens TC63 User Manual
Page 356
TC63 AT Command Set
13.23 AT^SMGL
s
TC63_ATC_V00.490
Page 356 of 501
5/24/05
Confidential / Draft - Do not copy
13.23
AT^SMGL List SMS messages from preferred store without set-
ting status to REC READ
Syntax
Command Description
The execute command is the same as the write command, but uses the given default of
.
The write command allows to select a status type and lists, from the message storage
, all messages
that currently have the specified
. The major difference over the standard command
is that the
status of the listed messages remains u n c h a n g e d (unread remains unread).
Notes
• The selected
can contain different types of SMs (e.g. SMS-DELIVERs, SMS-SUBMITs, SMS-STA-
TUS-REPORTs and SMS-COMMANDs), the response may be a mix of the responses of different SM types.
TE application can recognize the response format by examining the third response parameter.
• This command can be used only after the SMS data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the sms read
commands will result in ''+CME Error: 14'' (SIM busy)
• We recommend to take advantage of the "^SSIM READY" URC. If enabled with
, this URC acknowl-
edges to the user that SIM data is accessible after SIM PIN authentication. It will be delivered once the ME
has completed reading data from the SIM card.
Test Command
AT^SMGL=?
Response(s)
same as
Exec Command
AT^SMGL
Response(s)
^SMGL:
OK
Write Command
AT^SMGL=
Response(s)
same as
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS
%
%
%
%
%
%
%
!
%
!