2 combining at commands on the same command line, Combining at commands on the same command line – Siemens TC63 User Manual

Page 19

TC63 AT Command Set

1.4 AT Command Syntax

TC63_ATC_V00.490

Page 19 of 501

5/24/05

Confidential / Draft - Do not copy

1.4.2

Combining AT commands on the same command line

You may enter several AT commands on the same line. This eliminates the need to type the "AT" or "at" prefix

before each command. Instead, it is only needed once at the beginning of the command line. Use a semicolon

as command delimiter.

The table below lists the AT commands you cannot enter together with other commands on the same line. Oth-

erwise, the responses may not be in the expected order.

Note: When concatenating AT commands please keep in mind that the sequence of processing may be different

from the sequential order of command input. Therefore, if the consecutive order of the issued commands and

the associated responses is your concern, avoid concatenating commands on the same line.

AT command type

Comment

V.250 commands

with FAX commands (Prefix AT+F)

GSM 7.07 commands

with Siemens commands, Prefix AT^S)

GSM 7.05 commands (SMS)

To be used standalone

Commands starting with AT&

To be used standalone

To be used standalone