Siemens TC63 - Manual (Page 393)

TC63 AT Command Set
17.3 AT+CPBR
s
TC63_ATC_V00.490 Page 393 of 501 5/24/05
Confidential / Draft - Do not copy
17.3 AT+CPBR Read from Phonebook
AT+CPBR
serves to read one or more entries from the phonebook selected with AT command
AT+CPBS
.
The
AT+CPBR
test command returns the location range supported by the current phonebook storage, the maxi-
mum length of field and the maximum length of field. Note: Length information may not be
available while SIM storage is selected. If storage does not offer format information, the format list contains
empty parenthesizes.
The
AT+CPBR
write command determines the phonebook entry to be displayed with or a location
range from to . Hence, if no is given only the entry at
will be displayed.
If no entries are found at the selected location "OK" will be returned.
Syntax
Parameter Description
The first (lowest) location number within phonebook memory where to start reading. The maximum range sup-
ported by the current phonebook is given in the test command response.
If exceeds the upper bound (as indicated by the test command), command will
respond with "+CME ERROR: invalid index".
The last (highest) location number within phonebook memory where to stop reading. The maximum range sup-
ported by the current phonebook is given in the test command response.
If both and are in the range indicated by the test command parameter
loc>
, the list of entries will be output and terminated with "OK".
If exceeds the range indicated by the test command parameter , the list of entries will
be output but terminated with "+CME ERROR: invalid index".
Phone number in format specified by , it may be an empty string.
Test Command
AT+CPBR=?
Response(s)
+CPBR:
(1- ), ,
OK
+CME ERROR
Write Command
AT+CPBR=
[, ]
Response(s)
[+CPBR: , , , ]
[+CPBR: , , , ]
OK
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07, GSM 11.11 % % % % % % % ! % !
(num)
(num)
(str)