Interlogix Topaz User Manual User Manual
Page 58
Topaz
User Manual
40
Alarm Details Page Auto Display
To stop the Alarm Details page from automatically displaying, right-click anywhere inside the alarm
queue window and the following message displays.
Figure 41.Disable alarm details window
Click OK to stop the auto display feature.
Each time you now acknowledge an alarm, the color of the text changes to indicate that the alarm
has been acknowledged, but the alarm details page is not displayed.
You can still call up the Alarm Details page by clicking Detail or by double-clicking on the text of the
alarm inside the alarm queue window.
To start the Alarm Details page automatic display again, right-click anywhere inside the alarm queue
window and the following message displays.
Figure 42.Enable alarm details window
Click OK and the Alarm Details page again automatically displays each time you acknowledge an
alarm.
Color Graphics Not Ready Message
If you click MAP or triple-click an alarm in the Alarm Queue Window, which is linked to Color
Graphics, the Color Graphics map is displayed. For more details on Color Graphics, see
If you do not see a MAP button, Color Graphics has not been configured for the workstation. To
enable Color Graphics:
1. Click Hardware on the left side of the main screen.
2. Select Workstation.
3. Under Workstation, select the name of your workstation. The name should appear in the
Workstation Name field.
4. Select Alarm Graphics by clicking in the check box.
5. Click Save/Add.
6. Click Refresh Alarm Queue to show the MAP button.