Interlogix Topaz User Manual - Manual (Page 134)

Topaz
User Manual
116
Serial Port Setup Report
The Serial Port Setup Report recalls how Serial Ports are configured/setup in the system.
To navigate to the Serial Port Setup Report page, from any page within the System Setup pages
click the Serial Port tab button in the top navigation bar. The following page displays.
Figure 86.System Setup: Serial Port
The Serial Port page contains the following information:
Below is a sample of a displayed report for Serial Port Setup.
Serial Ports The Serial Port report lists all configured serial ports.
Display Report This is the default. Click to display on the Workstation monitor.
Print Report Click to send to the report printer.
Output To File Click to save the report into the file name specified in the Output File Name field. This saves the
report results in a file for later use outside of Topaz.
Output File Name If you selected Output to File, enter the name of the file to contain the report information. The Output
File Name can have up to 64 characters. For example, you can type “Myreport” and the report is
saved into the file named Myreport in the directory where Topaz was installed. You may enter a path
with the file name, for example, “c:\reports\Myreport”. The format of the report files is always plain
text that can be opened in Notepad.
Run Report Click to send the report to the destination specified (display, printer, or file). A message “Report
Completed” displays, with the number of records printed. Click OK to continue.
Cancel Report Click to stop the report or when you have finished viewing the report on the monitor. This cancels the
operation and return to the report screen. If no report displays and you click Cancel, it returns to the
Reports page.