Interlogix Topaz User Manual User Manual
Page 387

369
Cardholder’s
Name
CARDNAME
Alphanumeric
Up to 32 characters.
This data usually contains the name.
Card Serial
Number
CARDSN
Numeric
1 to 8 digits.
This is a reference field, and does not affect access
control operation. The number represents a card’s serial
number, and is typically printed on the card.
This is not to be confused with the actual encoded card
number (described above).
Card De-activation
Date
DACTDATE
Numeric (Date)
Delineated with
slash marks.
YYMMDD
This field defines the date a card is to automatically
become de-activated. Access is denied after this date.
‘YY’ represents the last two digits of the year. For
example: 1997 would be entered as 97.
‘MM’ is a two-digit number representing the year (01
through 12).
‘DD’ is a two-digit number representing the day of the
month (01 through 31).
The system defaults at twenty years from the date when
the card was assigned.
Department
DEPT
Alphanumeric
This is the value that was entered in the Department field
of the cardholder information screen.
Emergency
Contact Name
EMERNAME
Alphanumeric
Up to 32 characters.
This is a reference field for the name of a cardholder’s
primary contact in the event of an emergency, and may
be used at the option of the system owner.
Emergency
Contact’s
Telephone Number
EMERTELE
Numeric
Up to 12 characters.
Data for this reference field is transmitted with contiguous
numbers. For example, if the telephone number is (703)
555-1212, data is transmitted as: 7035551212
Employee Number EMPNO
Numeric
This is the Employee Number which is entered on the
Setup screen.
Issue Date
ISSUEDAT
Numeric
YYMMDD
This reference field is used to record the date of when a
card is issued to a visitors
‘YY’ represents the last two digits of the year. For
example: 1995 would be entered as 95.
‘MM’ is a two-digit number representing the year (01
through 12).
‘DD’ is a two-digit number representing the day of the
month (01 through 31).
Use of this field is optional.
Functional Field
Name
Protocol Field
Name
Type of Value
Description