Interlogix Topaz User Manual - Manual (Page 210)

Topaz
User Manual
192
Holidays Page
The Holidays page allows you to predefine up to 32 Holidays to be used with Time Schedules to
authorize access, control alarms, and output relays. Holidays are normally used to make the date
assigned behave like another day off, for example, a Saturday or Sunday. If no Holiday is assigned
for a given date, then the normal access rules apply for that date.
To navigate the Holidays page, from any Setup page click the Holidays tab button at the top of the
window, or from the main Setup page click the Holidays button on the right side of the page. The
following page displays.
Figure 140.Holidays
The Holidays page contains the following information:
Holidays A list of all defined holidays.
Description Enter the name of the holiday, up to 27 alphanumeric characters
Date Select the Date for the holiday by clicking on the down arrow to the right of the fields and clicking on
the desired date. A calendar is available by clicking the Calendar.
Holiday Type 1/2 Select which types of Holiday are active for a given date.
• If a Holiday is defined without a Holiday Type, then the Holiday is like a regular day off, in other
words, normal access schedules apply.
• If it is defined with a Holiday Type, then access for that date acts according to the schedule set up
for that type. For more information on setting up holidays, see Time Schedule Page on page 166.
Save/Add Once all changes have been made to the Holidays page, click Save.
After clicking Save, the “Operation Complete” messages displays.
Delete Click to delete the selected holiday from the database.
Clear At any point if you wish to clear out all entered information and start over, click Clear.