Interlogix Topaz User Manual - Manual (Page 47)

Chapter 2
Using Topaz
29
Now, click Enter to complete your log-on to the Topaz System.
Starting Topaz the First Time Topaz is Started
The following applies only if you are using the Topaz Software for the first time. If this is not the first
time, and you wish to use Auto Configuration, see
Auto Configuration Setup Page on page 252.
After clicking Enter, the following message displays.
Figure 35.Auto configuration
To have Topaz automatically configure the software and hardware, click OK. For more details see
Topaz Quick Start on page 30 and Auto Configuration on page 31.
If you do not wish to auto configure your system, click Cancel and the standard workstation browser
navigation page displays as shown in
Server/Workstation Display on page 35.