Interlogix Topaz User Manual - Manual (Page 21)

Chapter 1
Getting Started
3
System Requirements
To use the Topaz software, your PC must meet the following minimum requirements:
• Pentium® 4 processor or equivalent.
• Processor speed: 1.8 GHz or Higher.
• Windows XP PRO (with Service Pack 1), 2000 Professional (with Service Pack 4), or
Windows 7
• Microsoft Internet Explorer 6.0 or above installed (the wizard must be completed), which must
be installed from the Topaz CD.
• 768 MB Random-Access Memory (RAM) on the server. 512 MB on the workstation
• SVGA display card with 1024 X 768 screen resolution, able to support 65K colors. If using
Windows XP or 2000 Professional set at High Color (16bit).
• Video Memory: 4 MB.
• Disk Drive Space Required: 2 GB. 100 MB for workstation
• CD ROM Drive: 20X.
• If using Photo Badging, a USB Camera can be used or the GE Video capture card Composite
Video Camera is required. For a list of compatible USB cameras, refer to the software CD.
• Serial RS-232 Ports are required if using direct communication to field panels.
• Parallel Ports: Optional for printer.
• USB Ports: 1 minimum is required for the Software Sentinel.
• A network card must be installed with static TCP/IP enabled. Static IP addresses are
required.
• Removable media recommended for back-up.
System Options
• Eltron P310-C Dye Sublimation Card Printer.
• Report and Logging Printer.
• Digital Video Capabilities using the GE DVMRe Triplex.
The above options can be obtained through your local independent distributor.