Interlogix Topaz User Manual - Manual (Page 207)

Alarm Instruction Page
The Alarm Instruction page allows you to add unique instruction messages to be displayed to the
operator when an event occurs.
To navigate to the Alarm Instruction page from any setup page, click the Alarm Opt. tab button at
the top of the window, or from the main Setup page click the Alarm Options button on the right side
of the page. Then click the Instructions tab button and the following page displays.
Figure 138.Alarm Options: Instructions
The Instructions page contains the following information:
Alarm Instruction Name Enter up to 16 alphanumeric characters for the Alarm Instruction Name.
Alarm Instruction Names A list of previously defined Alarm Instructions.
Alarm Message Text Enter up to 495 alphanumeric characters for Alarm Message Text.
Save/Add Once all changes have been made to the instruction message, click Save.
After clicking Save, the Operation Complete messages displays.
Delete Click to delete the selected Alarm Instruction from the database.
Clear At any point if you wish to Clear out all entered information and start over, click Clear.
CAUTION: Clicking Clear before clicking Save deletes newly entered data.