Interlogix Topaz User Manual - Manual (Page 236)

Topaz
User Manual
218
How to configure an event printer
To select an event printer, click the drop-down list and click the name of the local printer. The Event
Printer prints all events that are generated by the system. The default is “None”.
If no printer is listed, you need to configure a local printer connected directly to the workstation.
You cannot select the same printer for both Event Printer and Report Printer. You must use two
different printers. After you configure the local printer properties you can select the Event Printer
under Hardware – Workstation.
Set the properties for the local printer available to this workstation.
Do the following to configure the properties for the event printer.
1. Click Start, select Settings, and then Printers.
Figure 162.Start menu: Printers
2. Click Printers.
Figure 163.Printers window
3. Right click the printer icon that is directly connected to your workstation and click Properties.
Windows 2000
Windows XP
Windows 2000 Windows XP