Elevator public access, Figure 171.elevator: public access – Interlogix Topaz User Manual User Manual
Page 253
Chapter 9
Hardware
235
Elevator Public Access
The Elevator Public Access page allows you to define multiple public access scenarios for
elevators. At the start of the time schedule, elevator buttons associated with the selected security
areas are enabled allowing anyone to have access to those elevator floors.
For an overview on the Elevator Control, see
To navigate to the Public Access page, from any page in the Field Panel setup pages, click the
Elevator tab button at the top of the window and then click the Public Access tab button and the
following page displays.
Note: After clicking the Public Access tab, the tabs for Dial-Up, Elevator, Floor Def., and Cab Setup are no longer
available and appear like this example,
. To access these tabs again you must click the Field Panel /
Setup tab.
Figure 171.Elevator: Public Access
The Public Access page contains the following information:
Public Access Elevator Areas This is a list of Public Access Elevator Areas that have been configured. If you have not
configured any areas yet, the list is empty. To modify an existing area, click the name in the
list to select it.
Public Access Area Name
Enter the name of up to 26 characters for the public access area. This indicates the
Security Area open to the public during the selected time schedule.