Reader setup report, Figure 80. system setup: reader – Interlogix Topaz User Manual User Manual
Page 128
Topaz
User Manual
110
Reader Setup Report
The Reader Setup Report provides all information on how the readers are configured/set up. To
navigate to the Reader Setup Report page, from any page within the System Setup report pages
click the Reader tab button in the top navigation bar. The following page displays.
Figure 80.System Setup: Reader
The Reader page contains the following information:
Reader Setup
The Reader Setup report provides all information on how the readers are configured/set up in the system.
All Readers?
If Yes is selected, all readers are listed on the report. If No is selected, then a reader must be selected
from the drop-down list under Reader Name.
Reader Name
From the drop-down list of pre-configured readers, scroll through and select the reader to be recalled in
the report by clicking on the Reader Name.
Display Report
This is the default. Click to display on the Workstation monitor.
Print Report
Click to send to the report printer.
Output To File
Click to save the report into the file name specified in the Output File Name field. This saves the report
results in a file for later use outside of Topaz.
Output File NameIf you selected Output to File, enter the name of the file to contain the report information. The Output File
Name can have up to 64 characters. For example, you can type “Myreport” and the report is saved into
the file named Myreport in the directory where Topaz was installed. You may enter a path with the file
name, for example, “c:\reports\Myreport”. The format of the report files is always plain text that can be
opened in Notepad.
Run Report
Click to send the report to the destination specified (display, printer, or file). A message “Report
Completed” displays, with the number of records printed. Click OK to continue.
Cancel Report
Click to stop the report or when you have finished viewing the report on the monitor. This cancels the
operation and returns to the report screen. If no report displays and you click Cancel, it returns to the
Reports page.