Interlogix Topaz User Manual - Manual (Page 366)

Topaz
User Manual
348
30 The system cannot read from the specified drive.
31 A device attached to the system is not functioning.
32 The file is already being used by another process.
33 The process cannot access the file because the file is locked by another process.
34 The wrong diskette is in drive.
35 The program could not open the requested file. The FCB limit was exceeded.
36 The system has detected an overflow in the sharing buffer.
37 The system cannot write to the write-protected drive.
38 An unknown device was specified.
39 The device is not ready.
40 The device does not recognize the command.
41 Data Error. If error occurred on the hard disk, retry the command. IF error occurs again, the hard disk may have
to be reformatted. If error occurred on a diskette, insert a formatted diskette and retry the command.
42 Invalid command length.
43 Seek Error. The disk may be damaged, unformatted or not compatible.
44 The specified disk or diskette cannot be accessed. Format the disk.
45 Sector not found. The disk may be damaged, unformatted or not compatible.
46 The printer is out of paper.
47 The system cannot write to the specified drive.
48 The system cannot read from the specified drive.
49 The device is not ready.
50 The network request is not supported.
51 The remote computer is not available.
52 A duplicated name exists on the network.
53 Network path not found.
54 The network is busy or is out of resources.
55 The specified network resource is no longer available.
56 The network BIOS command limit has been reached.
57 A network adapter hardware error occurred.
58 The specified server cannot perform the requested task.
59 An unexpected network error occurred.
60 The remote adapter is not compatible.
Error Description