Interlogix Topaz User Manual - Manual (Page 130)

Topaz
User Manual
112
Alarm Point Setup Report
The Alarm Point Setup Report tells how Alarm Points are configured/setup in the system.
To navigate to the Alarm Point Setup Report page, from any page within the System Setup pages
click the Alarm Point tab button in the top navigation bar. The System Setup report page displays.
Figure 82.System Setup: Alarm Point
The Alarm Point page contains the following information:
Alarm Point Setup This report provides all information on how alarm points are configured/set up in the system.
All Alarm Points? If Yes is selected, all alarm points are listed on the report. If No is selected, then an alarm point must
be selected from the drop-down list under Alarm Point Name.
Alarm Point Name From the drop-down list of pre-configured alarm points, scroll through and select the alarm point to be
recalled in the report by clicking on the Alarm Point Name.
Display Report This is the default. Click to display on the Workstation monitor.
Print Report Click to send to the report printer.
Output To File Click to save the report into the file name specified in the Output File Name field. This saves the
report results in a file for later use outside of Topaz.
Output File Name If you selected Output to File, enter the name of the file to contain the report information. The Output
File Name can have up to 64 characters. For example, you can type “Myreport” and the report is
saved into the file named Myreport in the directory where Topaz was installed. You may enter a path
with the file name, for example, “c:\reports\Myreport”. The format of the report files is always plain text
that can be opened in Notepad.
Run Report Click to send the report to the destination specified (display, printer, or file). A message “Report
Completed” displays, with the number of records printed. Click OK to continue.
Cancel Report Click to stop the report or when you have finished viewing the report on the monitor. This cancels the
operation and return to the report screen. If no report displays and you click Cancel, it returns to the
Reports page.