Interlogix Topaz User Manual - Manual (Page 184)

Topaz
User Manual
166
Time Schedule Page
The Time Schedule page allows you to configure time frames to link to functions within Topaz. For
example, you can configure a Time Schedule to automatically lock, and unlock doors, mask alarms
during business hours, or to turn on the parking lot lights.
To navigate to the Time Schedule page, from any Setup page click the Time Schedule tab button at
the top of the page, or from the main Setup page click the Time Schedules button on the right side
of the page. The following page displays.
Figure 130.Time Schedules
The Time Schedule page contains the following information:
Schedule Name Enter up to 16 alphanumeric characters. For example, “07:00-16:00 M-F” (Military time, meaning that
the time schedule covers from 7am to 4pm Monday through Friday) or “Work Hrs”. Military time is
sometimes referred to as a 24 hour clock shown in the chart below. For example, 11:50pm would be
23:50
Schedules You can select a currently configured Time Schedule from the Schedules list. By clicking on a Time
Schedule in the list you can see the start and stop time, days of the week, and holiday type for which it
is set. You can also use this selection to pick an existing Time Schedule that is similar to one you want
to add, then change its Schedule Name and other fields.
Note: A maximum of 127 Time Schedules may be configured on the Topaz System.
Start Time Select the time frames that the schedule covers, by clicking on the down arrow to the right of the first
field selection (the hour). Then click the number of the start hour from the drop-down list 1-23. Select
the minutes (00-59) the same way.
Stop Time Set the ending time for the schedule.