Readers, Figure 172.reader: setup, Reader setup page – Interlogix Topaz User Manual User Manual
Page 256

Topaz
User Manual
238
Readers
The Reader pages allow you to add, modify, or delete readers, including configuring the reader
address, name, description, unlock time, security area, etc.
There are two reader pages
•
•
Reader Setup Page
To navigate to the Reader Setup page from any Hardware page click the Reader tab button in the
navigation bar at the top of the main window, or from the main Hardware screen click the Reader
button on the right side of the screen. The following page displays.
Figure 172.Reader: Setup
The Setup page contains the following information:
Reader Name
Enter the Reader Name of up to 12 alphanumeric characters, for example, “Lobby Door” or
“Parking Gate”.
Reader Number
Select the Reader Number from the drop-down list of 0-7 by clicking on the number. This
number is the address where this reader is connected on the reader board. If you are not
sure of the address contact your installer.
Unlock Time (Seconds)
The Unlock Time is the amount of time the door lock is to stay unlocked allowing the
cardholder to open the door. Type the number of seconds directly into this field. The range
of times that can be entered is 0-255. The default is 6 seconds.