H3C Technologies H3C Intelligent Management Center - Manual (Page 618)

600
2. Click Add and select Client Version from the shortcut menu.
The Add Client Version Upgrade Task page appears.
3. Configure the following parameters:
{
Task Name—Enter the task name, which must be unique in UAM.
{
Update Type—Select a client update type from the list. Options are Optional, Force, and
Immediate Upgrade.
− Optional—Displays a dialog box within 2 hours after the user passes authentication,
allowing the user to upgrade the iNode client or ignore the upgrade.
− Force—Displays a message when the user passes authentication, notifying the user of a
forcible client upgrade that will occur within 2 hours.
− Immediate Upgrade—Immediately upgrades the iNode client on the user endpoint after the
user passes authentication.
{
Upgrade Object—Select PC Client as the client type to be upgraded.
{
Download Rate Limit—Set the upper rate limit for a user to download the client upgrade file, in
kbps. The value range is 10 to 1024.
{
Client Upgrade File—Click Browse to select an upgrade file.
{
Third-Party Server URL—Specify the URL of a third-party server that stores the file for client
upgrade. If this field is empty, the client downloads the upgrade file from UAM.
{
Task Description—Enter a description for the task.
{
User Selection Mode—Select one mode when adding or modifying the client upgrade task.
− By User—When you select this option, the Selected Access Users list is displayed. Click
Select. Query the access users and select one or more access users. Click OK. One user can
be selected by only one task. Access users that have been selected by other tasks are not
displayed.
− By User Group—When you select this option, the user group tree is displayed. Select one or
more user groups to which the client upgrade task applies. The task applies to all users in the
selected groups, but it does not apply to users in the child or parent groups of the selected
groups. One user group can be assigned to only one client upgrade task. The groups that
have been assigned to other client upgrade tasks are grayed out.
IMPORTANT:
•
If you do not select any access user or user group, the client upgrade task does not take effect.
• An access user and the user group it belongs to can be assigned to different client upgrade tasks.
If the assigned tasks are of the same type, only the upgrade task assigned to the access user takes
effect.
4. Click OK.
Adding a client configuration upgrade task
1. Access the client upgrade task list page.
2. Click Add and select Configuration Upgrade from the shortcut menu.
The Add Client Configuration Upgrade Task page appears.
3. Configure the client configuration upgrade task parameters. For information about configuring the
parameters, see "
Adding a client version upgrade task ." Make sure the file selected for the Client
Upgrade File field supports client configuration upgrade.