H3C Technologies H3C Intelligent Management Center - Manual (Page 45)

27
To enter the proprietary attribute assignment policy configuration page, click the User tab and select User
Access Policy > Access Device Management > Proprietary Attribute from the navigation tree, as shown
in
Figure 14 .
For more configuration information, see " Configuring proprietary attribute assignment policies ."
Figure 14 Entering the proprietary attribute configuration page
Configuring a service
A service is a set of access policies applied in specific access conditions. You must add services before
adding access users. When you add an access user, apply for a service for the user.
To enter the access service page, click the User tab and select User Access Policy > Access Service from
the navigation tree, as shown in
Figure 15 .
For more configuration information, see " Configuring access services ."
Figure 15 Entering the access service page
Configuring an access user
The configuration for an access user includes account, password, and service. When the access user is
authenticated and online, the user is limited by the policies in the service.