H3C Technologies H3C Intelligent Management Center User Manual
Page 222
204
−
First Login—A registered guest becomes valid at first login.
This parameter applies to all guests except those preregistered on the self-service center.
Default Values for Guests
{
Max. Transparent Portal Bindings—Maximum number of endpoints that can be bound with the
same guest account for transparent portal authentication. The value can be an integer in the
range 1 to 5 or Not Supported. Not Supported indicates endpoints cannot be bound with a
guest account for transparent portal authentication. This parameter takes effect only when the
Guest Auto-Registration parameter is enabled on the Guest Parameters page.
{
Default validity period of guests—Default validity period of guests whose expiration time is not
configured or cannot be configured. The validity period of those guests are also affected by the
Maximum Validity Time of Managed Guests parameter of a guest manager. If the two
parameters use different values, the parameter with the smaller value applies to the guests. For
information about configuring the Maximum Validity Time of Managed Guests parameter, see
{
Guest Password Lifetime—Maximum time in which a guest password is valid. Once the
password is expired, the guest cannot access the network. The value 0 indicates the guest
password never expires.
{
Password Generation Rule—Rule that defines the type of passwords dynamically generated by
UAM. UAM supports the following password generation rules:
−
N Bit Numeric.
−
N Bit Letters.
−
N Bit Alphanumeric.
N is an integer in the range of 1 to 32. This parameter does not take effect when guests
manually enter passwords for registration.
Quick Account Creation
{
Guest Lite Registration Verification—Method of verifying endpoint users for guest registration.
The value can be:
−
Verification Code—The user must enter the verification code generated on the SMS guest
sign-in and authentication page.
−
License Code[XXX]—The user must enter the correct license code generated in the brackets
([]).
−
No Verification—The user does not need to be verified.
Use Verification Code or License Code to prevent malicious registration.
{
Name Generation Rule—Rule for UAM to generate guest account names. The value can be
Millisecond value for system time, Prefix[XXXX]+millisecond value, or
YYMMDDhhmmss+4-digit random number.
For example, if a guest is registered at 2014-01-01 08:08:08:123 (1388534888123 in
milliseconds), UAM can generate the following account names for the guest:
−
1388534888123 if Millisecond value for system time is selected.
−
auto1388534888123 if Prefix+millisecond value is selected and the prefix is set to auto.
−
140101080808ZZZZ if YYMMDDhhmmss+4-digit random number is selected and the
4-digit random number is ZZZZ.
Guest Service List