H3C Technologies H3C Intelligent Management Center - Manual (Page 548)

530
{
If you select the Daily schedule type, reports of the previous day are generated every day. For
example, if you set the report start time to 2011-08-10, the first daily report is generated at 04:00
a.m. on 2011-08-11, and the data at 00:00 on the day when the report was generated displays
in the report.
{
If you select the Weekly schedule type, reports of the previous seven days are generated every
seven days. For example, if you set the report start time to 2011-08-10, the first weekly report is
generated at 04:00 a.m. on 2011-08-17, and the data at 00:00 on the day when the report was
generated displays in the report.
{
If you select the Monthly schedule type, reports of the previous month are generated every month.
For example, if you set the report start time to 2011-08-10, the first monthly report is generated at
04:00 a.m. on 2011-09-10, and the data at 00:00 on the day when the report was generated
displays in the report.
{
If you select the Quarterly schedule type, reports of the previous three months are generated
every three months. For example, if you set the report start time to 2011-08-10, the first quarterly
report is generated at 04:00 a.m. on 2011-11-10, and the data at 00:00 on the day when the
report was generated displays in the report.
{
If you select the Half Yearly schedule type, reports of the last half year are generated every half
year. For example, if you set the report start time to 2011-08-10, the first half yearly report is
generated at 04:00 a.m. on 2012-02-10, and the data at 00:00 on the day when the report was
generated displays in the report.
{
If you select the Yearly schedule type, reports of the previous year are generated every year. For
example, if you set the report start time to 2011-08-10, the first yearly report is generated at
04:00 a.m. on 2012-08-10, and the data at 00:00 on the day when the report was generated
displays in the report.
6. Set the time at which a report becomes invalid (optional). Then, UAM does not generate any
scheduled report.
{
Select the End by box, and enter an end date and time in the format of YYYY-MM-DD hh:mm.
{
Or click the Calendar icon to select an end date and then enter an end time at the lower part.
7. Set the report file format: select a file format from the Report File Format list. These options are
available: PDF, CSV, MS Excel, and MS Excel (Data-only).
8. Send a report by Email (optional):
Select the Send by Email box, and enter the Email address of the receiver. Reports can be sent to
only one Email address.
9. Set an idle period:
Click the Set Parameter icon for Idle Period to enter the page for setting parameters. Enter an
idle period in the Parameter Value field. Only accounts with an idle period greater than the
configured idle period display in the report. Click OK. Click OK to return to the page for adding
a report. The parameter setting link changes from the Set Parameter icon to the Successful
Corresponding Operation icon .
10. Select a user group:
Click the Set Parameter icon for User Group to enter the Set Parameter page. Select a user
group from the Parameter Value list. Only accounts in the selected user group display in the report.
Click OK to return to the page for adding a report. The parameter setting link changes from the Set
Parameter icon to the Successful Corresponding Operation icon .
11. Click OK.