H3C Technologies H3C Intelligent Management Center - Manual (Page 42)

24
Figure 10 Recommended configuration procedure for 802.1X authentication and UAM local
authentication
UAM configuration
To configure RADIUS authentication:
1. Configure the access device.
2. Configure the access scenario.
3. Configure an access policy.
4. Configure a service.
5. Configure an access user.
Configuring the access device
Access device configuration is required for configuring the access device group of an access condition.
HP recommends configuring the access device first.
You must add the access device's information (such as the vendor name, IP address, port number, and
key) to UAM, so UAM can exchange RADIUS packets with the access device during authentication.
To enter the access device configuration page, click the User tab and select User Access Policy > Access
Device Management > Access Device from the navigation tree, as shown in Figure 11 .
For more configuration information, see " Configuring access devices ."