H3C Technologies H3C Intelligent Management Center - Manual (Page 344)

326
• Comware V3 devices support portal-free IP addresses and portal-free user IP addresses, so
Portal-Free IP Address and Portal-Free User IP need to be configured.
The following describes how to configure Portal-Free IP Address and Portal-Free User IP. For the
configuration of other parameters, see " Parameters for Comware V5 switches and routers ."
Portal-Free IP Address
The IP addresses an unauthenticated endpoint user can access are called portal-free IP addresses.
To configure a portal-free IP address:
1. Access the Deploy Configuration page.
2. To add a portal-free IP address, click Add in the Portal-Free IP Address area.
3. Select an interface from the Interface list, and enter an IP address in the IP Address text box.
This configuration enables a user connecting to the selected interface to access the specified IP
address before the user passes portal authentication.
4. Click OK.
5. Repeat steps 2 to 4 to add more portal-free IP addresses.
6. To delete a portal-free IP address, click the Delete icon for it.
Portal-Free User IP
An unauthenticated endpoint user can use some IP addresses to access all networks. These IP addresses
are called portal-free user IP addresses.
To configure a portal-free user IP address:
1. Access the Deploy Configuration page.
2. To add a portal-free user IP address, click Add in the Portal-Free User IP area.
3. Select an interface from the Interface list, and enter the VLAN ID, IP address, and MAC address in
the VLAN ID, IP Address, and MAC address text boxes, respectively.
This configuration enables the specified VLAN user connecting to the selected interface to access
all networks through the specified VLAN by using the specified IP address and MAC address
before the user passes portal authentication.
4. Click OK.
5. Repeat steps 2 to 4 to add more portal-free user IP addresses.
6. To delete a portal-free user IP address, click the Delete icon for it.
Parameters for wireless devices
The supported wireless devices include H3C wireless devices and some of HP Comware devices
(non-MSM devices).
Differences from Comware V5 devices
Some wireless devices do not support postauthentication redirection, so Postauthentication Redirect URL
is not needed for these devices.
To configure portal authentication ports, the Transparent Authentication on Smart devices parameter
needs to be configured.
The following describes how to configure portal authentication ports. For the configuration of other
parameters, see " Parameters for Comware V5 switches and routers ."