H3C Technologies H3C Intelligent Management Center - Manual (Page 101)

83
Figure 81 Entering the access service page
Specifying a foreign server (UAM 2)
Specify a foreign server (UAM 2 in this example) on IMC UAM 1. When UAM 1 receives an
authentication request from a user, it examines whether the user's service needs roaming authentication.
If yes, UAM 1 forwards the request to UAM 2. UAM 2 determines whether the user can pass the
authentication.
1. To enter the roaming server configuration page, click the User tab and select User Access Policy >
Service Parameters > System Settings from the navigation tree.
2. Click the Configure icon for the Roaming Configuration item to enter the roaming server
configuration page, as shown in
Figure 82 .
For more configuration information, see " 21 Configuring roaming authentication ."
Figure 82 System configuration page
UAM 2 configuration
To configure UAM 2:
1. Configure UAM 1 as an access device.
2. Configure access users.