H3C Technologies H3C Intelligent Management Center - Manual (Page 141)

123
{
Service Group—Select a service group for the AP group. You can add AP groups to different
service groups to facilitate management.
{
Description—Enter the AP group description. Detailed description can help facilitate
maintenance.
4. Configure the AP list:
a. Click Add in the AP List area.
The Add AP window appears.
b. Enter the NAS ID and description.
c. Click OK.
d. Repeat steps a through c to add more APs.
e. To delete an undesired AP, click the Delete icon for the AP.
5. Click OK.
Modifying an AP group
1. Access the AP group list page.
2. Click the Modify icon for the AP group you want to modify.
The page for modifying the AP group appears.
3. Modify the AP group parameters except Service Group, which cannot be modified.
For more information about the parameter description, see "
Adding an AP group ."
4. Click OK.
Deleting an AP group
An AP group cannot be deleted when it is used in an access scenario.
To delete an AP group:
1. Access the AP group list page.
2. Click the Delete icon for the AP group you want to delete.
A confirmation dialog box appears.
3. Click OK.