H3C Technologies H3C Intelligent Management Center - Manual (Page 261)

243
time you specify applies to all imported access users. Leaving this parameter unspecified
means that the access users never expire.
− Password—Password of the access users. This parameter has the following options:
Unchanged, Not Imported, and the specified column number in the file. Select Unchanged
to keep the parameter unchanged, select the specified column number in the file as the
password, or select Not Imported and enter a password for the access users.
− Allow User to Change Password—This parameter provides the following options:
Unchanged, Yes, and No. Select Unchanged to keep the parameter unchanged, select Yes
to allow access users to modify the password in the self-service center or iNode client, or
select No to not allow access users to modify the password.
− Enable Password Strategy—This parameter provides the following options: Unchanged, Yes,
and No. Select Unchanged to keep the parameter unchanged, select Yes to enable the
password control strategy, or select No to not enable the password control strategy. The
strategy requires that the access user must meet certain requirements when the user tries to
change the password through the iNode client. An IMC administrator can change the
password of any access user regardless of whether a password strategy is used. Once the
access user changes the login password as required, this field changes to No. This option
is available only when you select Yes for Allow User to Change Password.
− Modify Password at Next Login—This parameter provides the following options,
Unchanged, Yes, and No. Select Unchanged to keep the parameter unchanged, select Yes
to require the access users to change the password next time the user passes authentication,
or select No to not require the access users to do so. This option is available only when you
select Yes for Enable Password Strategy.
− Max. Idle Time—Maximum idle time permitted for online access users. When the time
expires, the users are forcibly logged off. This parameter has the following options:
Unchanged, Not Imported, and the specified column number in the file. Select Unchanged
to keep the parameter unchanged, select the specified column number in the file as the max
idle time, or select Not Imported and enter a max idle time for the access users. Leaving this
parameter unspecified means that the access users can always stay online.
− Max. Concurrent Logins—Maximum number of concurrent online users that use the same
account. This parameter can be either read from the imported file or manually specified.
This parameter has the following options: Unchanged, Not Imported, and the specified
column number in the file. Select Unchanged to keep the parameter unchanged, select the
specified column number in the file as the max concurrent logins value, or select Not
Imported and enter a max concurrent logins value for the access users. Leaving this
parameter unspecified means that the number of concurrent online users using the same
account is not limited.
− Max. Smart Device Bindings for Portal—Maximum number of device MAC addresses that
can be bound to the access users. Select the column that contains the maximum device
bindings in the file, or select Not Imported and enter a value that is applied to all accounts
to be imported. If you want to disable transparent portal authentication for the accounts,
select Not Imported, and then select Not Supported.
− Login Message—Message that the access users see when they pass authentication. This
parameter has the following options: Unchanged, Not Imported, and the specified column
number in the file. Select Unchanged to keep the parameter unchanged, select the specified
column number in the file as the login message, or select Not Imported and enter a login
message for the access users.
− WLAN Cell Phone Number—Phone number that can be bound to the access user. This
parameter appears only when Third-Party Authentication System is enabled in UAM system