H3C Technologies H3C Intelligent Management Center - Manual (Page 314)

296
1. Access the access device list page.
2. Select one or more devices for which you want to synchronize port states and configurations.
Make sure the selected devices are the H3C wired, H3C wireless, or HP wired configuration type.
Devices that have an empty Config Type column do not support port synchronization.
3. Click Sync Ports.
UAM starts to synchronize port configurations on the selected devices. Wait a few minutes while
the port configurations are being synchronized.
4. Click Refresh.
The access device list page refreshes and displays the latest port synchronization results. If an
access device has a failed synchronization result, click the Details icon for the access device to
view the failure reason.
Deploying configurations to access devices
UAM provides the configuration deployment feature to promptly deliver AAA configuration,
authentication port configuration, and commands to the access devices.
HP recommends that you use the following deployment procedures:
1. Deploy AAA configurations to most access devices in batches, so the devices have the same
RADIUS, domain, and global 802.1X and MAC authentication settings. If some access devices
require different AAA configurations, deploy their respective AAA configurations separately.
2. Deploy authentication port configurations to each access device, including 802.1X and MAC
authentication settings. Authentication port configurations cannot be deployed in batches,
because the number of ports, port numbering, and authentication ports on devices can vary
largely.
3. Deploy other commands to access devices in batches or separately.
AAA configuration and command deployment is supported only on devices of the H3C wired, H3C
wireless, and HP wired configuration types. The AAA parameters to be deployed vary with the
configuration types.
Authentication port configuration deployment is supported only on switches of the H3C and HP wired
configuration types. Port parameters to be deployed vary with the configuration types.
Accessing the batch deployment page
To access the page for deploying AAA configurations or commands to access devices in batches:
1. Access the access device list page.
2. Select the devices to which you want to deploy configurations. Make sure all selected devices have
the same configuration type: H3C Wired, H3C Wireless, or HP Wired.
3. Click Deploy and select AAA Configuration or Commands.
The AAA Configuration or Commands page appears.
Accessing the individual deployment page
To access the page for deploying configuration to a single access device:
1. Access the access device list page.
2. Click the Operation icon for the target device, and then select Deploy Configuration from the
operation menu. The Operation icon appears only when the device is the H3C wired, H3C
wireless, or HP wired configuration type.