H3C Technologies H3C MSR 50 - Manual (Page 46)

2-26
This cable is optional. You need to order it when purchasing a SIC-8AS.
z
If the peer device is a dumb terminal and provides an RJ-45 interface, use a dumb terminal cable to
connect it to the SIC-8AS cable. The two ends of the dumb terminal cable are male and female
RJ-45 connectors. Connect the male RJ-45 connector to the SIC-8AS cable, and the female RJ-45
connector to the dumb device through a straight-through cable.
Figure 2-28 Dumb terminal cable
Figure 2-29 Connect to the dumb terminal
Dumb
terminal
SIC- 8 AS
Dumb terminal
cable
Straight-through
cable
Dumb terminal
converter
SIC- 8 AS
cable
This cable is optional. You need to order it when purchasing a SIC-8AS.
z
If the peer device provides a DB25/DB9 interface (for example Modem), use an AUX cable to
connect it to the SIC-8AS cable.