beautypg.com

Mim-16fsw/mim-16fsw-poe/dmim-24fsw/dmim-24fsw-poe, Introduction, Interface attributes – H3C Technologies H3C MSR 50 User Manual

Page 110

background image

3-6

MIM-16FSW/MIM-16FSW-PoE/DMIM-24FSW/DMIM-24FSW-PoE

Introduction

The 16/24-port 10/100 Mbps Ethernet Layer 2 switching MIM interface modules
(MIM-16FSW/MIM-16FSW-PoE and DMIM-24FSW/DMIM-24FSW-PoE) are applicable to MSR 30
series routers. A router installed with MIM-16FSW or DMIM-24FSW can work as a switching/routing
integrated device on a small-sized enterprise network to connect PCs and network devices inside the
network directly. MIM-16FSW-PoE/DMIM-24FSW-PoE can supply power to PDs through PoE.

The interfaces provided on the MIM-16FSW and DMIM-24FSW module are as follows:

z

16 × 10/100 Mbps RJ-45 connector interfaces on the MIM-16FSW module

z

24 × 10/100 Mbps RJ-45 connector interfaces on the DMIM-24FSW module

z

2 × 10/100/1000 Mbps (gigabit) RJ-45 connector electrical interfaces on the DMIM-24FSW module

z

2 × SFP fiber interfaces (Fiber interfaces and gigabit electrical interfaces share the MAC layer) on
the DMIM-24FSW module

The interface modules support:

z

100 meters (328.1 ft.) of transmission distance over the category-5 twisted-pair cable

z

100 meters (328.1 ft.) of transmission distance between any interfaces over the category-5
twisted-pair cable

z

Operation at 100 Mbps and 10 Mbps, autosensing

z

Full duplex and half-duplex, with the former in common use

z

24FSW provides two Combo interfaces as shown in

Table 3-6

. By default, the electrical interfaces

take effect.

Interface attributes

The interface attributes of the MIM-16FSW/MIM-16FSW-PoE /DMIM-24FSW/DMIM-24FSW-PoE are
given in the following table:

Table 3-6 Interface attributes of the MIM-16FSW/MIM-16FSW-PoE/DMIM-24FSW/DMIM-24FSW-PoE

Attribute

MIM-16FSW/MIM-16FSW-PoE

module

DMIM-24FSW/DMIM-24FSW-PoE module

Connector

RJ-45

RJ-45 + SFP fiber interface

Interface type

MDI/MDIX

MDI/MDIX + SFP fiber interface

Number of connectors

16 × 100 Mbps RJ-45 connectors

z

24 × 100 Mbps RJ-45 connectors

z

Two 1000 Mbps RJ-45 connectors

z

Two SFP connectors

Cable type

Straight-through and crossover
Ethernet cable

Straight-through and crossover Ethernet
cable; Fiber interface supports SFP fiber
module

Operating mode

10/100 Mbps autosensing
Full/half duplex

z

24 × 100 Mbps electrical interface: 10/100
Mbps autosensing

z

2 × gigabit electrical interface:
10/100/1000 Mbps autosensing

z

2 × gigabit fiber interface: gigabit SFP
fiber interface

This manual is related to the following products: