Interface leds, Interface cable – H3C Technologies H3C MSR 50 User Manual
Page 150
3-46
Attribute
Description
Interface rate
1.544 Mbps
Cable type
8T1 conversion cable
Operating mode
CT1, ISDN PRI (only supported by the MIM-8T1)
FT1 (only supported by the MIM-8T1-F)
Supported service
z
Backup
z
Terminal access service
z
ISDN PRI (only supported by the MIM-8T1)
Interface LEDs
MIM-8T1 and MIM-8T1-F panels are similar. The following figure illustrates an MIM-8T1 panel.
Figure 3-53 MIM-8T1 panel
The following table describes the LEDs on the MIM-8T1/8T1-F panel:
Table 3-39 Description of the LEDs on the MIM-8T1/MIM-8T1-F panel
LED
Description
LINK
z
OFF means no link is present;
z
ON means a link is present.
ACTIVE
z
OFF means no data is being transmitted or received.
z
ON means data is being transmitted or received.
Interface cable
The following figure illustrates the 8T1 conversion cable for the MIM-8T1/MIM-8T1-F module.
Figure 3-54 8T1 conversion cable
At one end of the cable is a DB-68 connector for connecting the router and at the other end are eight
RJ-45 connectors for connecting other devices.