Mim-8ase/mim-16ase, Introduction, Interface attributes – H3C Technologies H3C MSR 50 User Manual
Page 190: Interface leds
3-86
MIM-8ASE/MIM-16ASE
Introduction
The 8/16-port enhanced asynchronous serial interface module (MIM-8ASE/MIM-16ASE)
transmits/receives and handles asynchronous serial interface data streams. ASE modules, however,
use RJ-45 connectors and AUX cables.
Interface attributes
The interface attributes of MIM-8ASE/MIM-16ASE are given in the following table:
Table 3-72 Interface attributes of MIM-8ASE/MIM-16ASE
Description
Attribute
MIM-8ASE module
MIM-16ASE module
Connector RJ-45
Number of connectors
8 (MIM-8ASE)
16 (MIM-16ASE)
Interface standard and operating
mode
RS232
Cable
z
AUX cable
z
Ethernet straight-through cable
z
MIM-8ASE/MIM-16ASE dumb terminal cable
Minimum baud rate (bps)
300
Maximum baud rate (bps)
115.2 k
Service supported
z
Dialup through Modem
z
Backup
z
Terminal access service
z
Asynchronous leased line service
Interface LEDs
MIM-8ASE panel is shown in the following figure:
Figure 3-104 MIM-8ASE panel
MIM-16ASE panel is shown in the following figure: