H3C Technologies H3C MSR 50 - Manual (Page 118)

3-14
z
Full duplex
Interface attributes
The interface attributes of MIM-1GEF/MIM-2GEF are given in the following table:
Table 3-14 Interface attributes of MIM-1GEF/MIM-2GEF
Description
Attribute
MIM-1GEF MIM-2GEF
Number of
interfaces
1 2
Connector SFP/LC
Interface standard 802.3, 802.3u, 802.3ab
Type
Multi-mode
short-haul (850
nm)
Single
mode
medium-ha
ul (1310
nm)
Long-haul
(1310 nm) Long-haul
(1550 nm) Ultra-long
(1550 nm)
Min. –9.5 dBm –9 dBm –2 dBm –4 dBm –4 dBm
Transmitti
ng optical
power
Max. 0 dBm –3 dBm 5 dBm 1 dBm 2 dBm
Receiver sensitivity –17 dBm –20 dBm –23 dBm –21 dBm –22 dBm
Central wavelength 850 nm 1310 nm 1310 nm 1550 nm 1550 nm
Fiber type
62.5/125 μm
multi-mode
9/125 μm
single
mode
9/125 μm single
mode 9/125 μm single
mode 9/125 μm
single mode
Max. transmission
segment 0.55 km (0.34
mi.) 10 km (6.21
mi.) 40 km (24.86
mi.) 40 km (24.86
mi.) 70 km (43.50
mi.)
Operating mode
1000 Mbps
Full duplex
Interface LEDs
MIM-1GEF panel is shown in the following figure:
Figure 3-16 MIM-1GEF panel
MIM-2GEF panel is shown in the following figure: