H3C Technologies H3C MSR 50 User Manual
Page 163
3-59
Before connecting to a port on 2SAE, confirm the line properties. There are ten cable options depending
on different line properties:
z
V.24 (RS232) DTE cable: DB-25 (male) connector at the network end
z
V.24 (RS232) DCE cable: DB-25 (female) connector at the network end
z
V.35 DTE cable: 34PIN (male) connector at the network end
z
V.35 DCE cable: 34PIN (female) connector at the network end
z
X.21 DTE cable: DB-15 (male) connector at the network end
z
X.21 DCE cable: DB-15 (female) connector at the network end
z
RS449 DTE cable: DB-37 (male) connector at the network end
z
RS449 DCE cable: DB-37 (female) connector at the network end
z
RS530 DTE cable: DB-25 (male) connector at the network end
z
RS530 DCE cable: DB-25 (female) connector at the network end
At one end of these cables is a DB-28 connector and at the other end is the connector that varies with
the port at the network side.
z
V.24 DTE cable
Figure 3-68 V.24 DTE cable
z
V.24 DCE cable
Figure 3-69 V.24 DCE cable
z
V.35 DTE cable