Gasboy SiteOmat Maintenance Manual - Manual (Page 91)

87 SiteOmat Setup and Maintenance Manual – MDE 4817G
4-5.1. Functional Buttons
The basic setup screen consists of additional buttons as follows:
a. Wizard: Reruns the wizard process again
NOTE
Running the wizard again overrides the existing
data. It should only be performed at startup.
b. Import: Imports a predefined setup template from an XML file
c. Export: Exports the current setup to a template; the export creates an XML file in a chosen
directory. This file can be used in the future for installing a similar station
d. Advanced mode: In cases where installing a complex station or adding supplemental data to
the basic station (additional hardware) - click on the Advanced Mode button and continue
to sections 6 and 7
e. Reload: Saves the changes and refreshes the data
4-6. SETUP WIZARD DEFAULTS
NOTE
The following section is intended for advanced users
only.
The Wizard defines the different buses or communication channels that transport data to/from
the controller systems and then the devices connected to the controller and their operating
attributes according to the conventions detailed below. These defaults may be changed as
needed, in order to suit specific or more complex station configurations, as described in
Section 7.
4-6.1. Ethernet Network Default Addresses
Forecourt Network is 192.168.x.x
Table 4-2 lists the IP addresses for the internal devices in the Controller.